Saturday, September 22, 2012

Foolproof Jumper Braids

In this post I will describe how I create my foolproof jumper braids. They aren't necessarily the easiest or fastest braids, but they look consistently good, they stay put and they work on almost any mane (aside from a natural one, of course). I have used these braids in both the jumper ring and the dressage ring and have gotten many compliments in both, and they easily survive several classes per day and/or being left in overnight.

I braid with yarn rather than elastics because the yarn stays in better and creates prettier braids by helping to keep the braids as close to the neck as possible rather than having them stick out sideways.

The number of braids that you should do depends on your personal preference and on your horse's particular mane. Thicker manes usually require more braids to keep them a manageable size, while thin manes can require fewer braids in order to give more bulk and roundness to each individual braid. If your horse's mane is extremely short, you should take smaller sections of hair to keep hair from popping out mid-braid (the further the hair has to move sideways to get into the braid, the shorter that section of hair becomes compared to the middle section).

Before starting, get your supplies ready. You'll need yarn that matches your horse's mane, a spray bottle of water (or Quic Braid if you prefer), a pull-through/rug hook (available at tack shops and at craft stores), scissors, elastics (optional) and a seam ripper for removing the braids afterward.

To measure and cut the yarn, grab the end of a roll in one hand and start wrapping it from that hand around your elbow (on the same arm) and back up to your hand. Keep wrapping until you have about 12 to 15 wraps, depending on the number of braids you plan on doing.  Find where you've grabbed the end of the yarn and cut through all of the wraps at that one point. This should leave you with 12 to 15 pieces of yarn of the same length, about double the length of your lower arm. Hang these in an easily accessible spot, either somewhere around your belt or on your horse's halter.

I recommend starting behind your horse's ears so that the higher braids end up more evenly spaced. If you reach the end and have to do one wide or several narrow braids, the difference in size will be less obvious at the withers where your hands and saddle pad will hide the braids anyway.

Step 1


After spraying the first few inches of mane a few times, grab a section of it (I prefer to simply use the same hand motion every time to get the same amount of hair rather than using a comb) and braid it straight down. Straightness is important at all times because crookedness in the braiding process will result in a crooked braid. You can make the first couple of cross-overs fairly loose if you would like to give your horse some room to stretch and then braid tightly the rest of the way down.

Step 2


About 1/3 of the way from the bottom, grab one piece of yarn while pinching the braid tight with your other hand and fold the yarn in half. Lay it behind or in front of your braid so that the middle of the yarn is against your braid, and continue to braid the rest of the way down, incorporating the two ends of yarn into two sections of hair in the braid. This is the same technique as you use for hunter braids.

Step 3


Braid until you are just above the ends of the hair. Tie off the braid by wrapping the yarn around the braid and tying a knot. If you aren't sure how to tie a braid off, this is an excellent article using a contrasting yarn colour for clarity. If your horse's mane is thick, it can be difficult to get the knot tight enough so for those manes I like to wrap a braiding elastic over the knot (make sure to gently pull the ends of the yarn out of the way).

If a minor imperfection develops in the second half of your braid, as has happened here when my horse shook her head, don't worry about it. That part of the braid will be hidden later on.


I like to braid the entire mane down before moving on to the next step to help me keep an eye on the size and length of my braids.

Step 4


Take your pull-through and insert it down through the braid about 2/3 of the way down. Insert it straight down through the center (it's much easier if you insert it through a gap between cross-overs and that helps to keep the braid straight).

Step 5


With the hook in the open position, put both ends of the yarn inside the loop and then close it. Bring the pull-through back up through the braid so that the yarn ends stick out of the front of the braid and then let the yarn fall out of the pull-through.

Step 6


Gently pull the yarn straight down. Your braid should fold up and finish with the yarn pointing at the ground.

Step 7


Now insert the pull-through straight down through to the back of the braid at the crest, as you would for a hunter braid. Grab the yarn again with your pull-through and bring it back up through the top of the braid.

Step 8 


Gently pull the yarn taut. Your braid should fold up a second time, with the folded bottom of the braid from the previous step ending up at the top of the underside of the braid. You might need to gently guide the folding process with your fingers as you pull.

Step 9


Keep the yarn taut as you bring one piece of yarn around each side of the braid, tying a simple overhand knot under the braid.

Step 10


Now bring one piece of yarn up around each side of the braid and tie another overhand knot on top. I like to use a surgeon's knot at this point, twisting an extra time to make it even more secure.

Step 11


To finish, bring one piece of yarn down around each side of the braid again and tie them together underneath the braid, using two overhand knots to make sure it won't budge. Again, I like to use a surgeon's knot at this point. All of these passes above and below the braid serve to make the braid round and to corral any loose hairs into the braid.

Step 12


Grab the two yarn ends and pull them out to the side or bottom of the braid so that you can cut them with the scissors without cutting the braid itself. There should be enough stretch in the yarn that they should disappear back under the braid when you let go of the cut ends. 

Repeat the same steps for the rest of your braids until the entire neck is done.


To remove the braids, you'll need to cut through your final knot underneath the braid and then you might also need to cut your wrap knot from the initial braiding down.


Saturday, September 8, 2012

Turnout Critique #6

This week's featured rider clearly tries hard to have good turnout and is doing a lot right, but she needs to focus on a few more details and ensure that she is using her safety equipment in a way that allows it to work as it should.


This was this rider's very first Bronze-level show and her turnout is extremely good for a rider starting at that level. 

Her pony is in excellent condition, shiny and in good weight. He is very clean and has nicely oiled hooves. The tail is brushed out nicely and is an excellent example of what a properly brushed out tail should look like. Each hair flows freely with none bunching together, which comes from working through the entire tail from bottom to top. I also appreciate that the mane is braided, and although I cannot tell much about the quality from the resolution of these photos, I can tell that they are thin with no frizz. It's possible that some of the braids have turned, which can be remedied by starting with a shorter mane if that is the case. The pony also appears to be nicely trimmed.


I'm not sure that the shape of the saddle fits this rider (although shortening the stirrups might help to put more bend in her knee and therefore use the front half of the saddle more), but it appears to be clean and in good repair. My biggest issue is with the stirrup irons. In two of these photos, the peacock safety stirrup is positioned so that the open (with rubber band) side is facing the pony. It may be that the stirrup leather was twisted for the flat phase, but it's important for that open side to face outward. If this rider were to fall, the only way that the rubber band could pop open to help release her foot would be if it was on the outside, the direction in which she would move in a fall. If this rider wishes to continue using safety stirrups, she should make sure to keep on eye on the peacock irons as she grows. Most brands are not designed to take more than a child's weight (due to the open side) and could bend, especially with the forces involved while jumping. There are other types of safety stirrups available, and a properly-sized solid stirrup iron can be very safe as well.

This rider actually commented to me that her saddle pad was too small, but I disagree. The flap area of this saddle pad is actually too large for this saddle (even when it slips back there is still about an inch of pad showing in front but three or four inches too much in the back), both in width and depth. The pad might be too small under the back of the saddle where I don't have a clear view of it, but simply going up to a horse-sized pad from a pony pad to fix that would make the flap area even more distractingly large. I would instead try different brands of pony-sized pads to find one that fits all the way around, leaving an inch or two of pad showing everywhere.

The bridle appears to be properly fitted and clean, and a converter is being used with the pelham as is allowed under EC rules for juniors. I would double-check the length of the standing martingale just to make sure that it isn't restricting the pony in any way. He is hitting the end of it while landing in the photo below, but this might be the highest that his head ever goes on landing. Personally, I would lengthen it by a hole or two just to make sure that the pony stays comfortable.


The rider is correctly turned out for the hunter ring in a classic combination of dark jacket, white shirt, dark gloves and beige breeches. It's possible that her boots could use a coat of polish because I can't detect much shine in these photos.

I am not a big fan of Tipperary helmets for the hunter ring, personally. I find that the sun's reflection off the shiny finish is distracting and the shape of the helmet can make it appear that the rider is looking down, which could count against you in an equitation class. There is such a variety of safe helmets available in all price ranges and fits, so I recommend that this rider search for one that is more conservatively-styled when the time comes to buy her next one.

This rider's hair is up in a bun, which is much better than a loose ponytail. I find that the bun is a bit large, though, so I might experiment with different styles to find something that stands out a little bit less. Some long-haired riders like tucking a long braid inside the shirt collar, while others find different shapes of bun to work better than others. I understand that very long or thick hair does not always fit inside a helmet, and some riders simply aren't comfortable with putting it there for safety or comfort reasons.

Overall, this rider is doing an excellent job so far and there really isn't much to change. The effort that she puts into her turnout is obvious and I'm sure that the judges notice it, too.

As always, a big thank you to this week's featured rider for submitting these photos! If you would like to participate in a future turnout critique, please send your photo(s) to showringreadyblog@gmail.com

Thursday, August 16, 2012

Equine Medications Resources

I've posted about the equine drug rules before, but mostly about what is permitted and what is not permitted. To expand, I will post a few resources about withdrawal/detection times to help plan showing when certain drugs must be used. Of course, it is best to consult with your veterinarian whenever you use a medication and never trust the detection times completely, but these provide helpful general guidelines.


Tuesday, July 24, 2012

Turnout Critique #5

This week's featured rider appears to put a lot of effort into her turnout. We're going to look at a few ways to further refine their look with a little bit more attention to detail.


One of the first things that I notice is that the tack all appears to be properly fitted to this very cute pony. The noseband is correctly placed at the right height, and everything looks clean. I would like to see the long excess stirrup leather either tucked under the flap or trimmed so that it doesn't flap around. Also, make sure to check the keepers on the bridle before entering the ring because one has slipped down and that might cause the cheek strap to flap while you're showing. If your keepers have a tendency to slip, it can sometimes be better to push them up slightly higher than normal where the leather might be thicker, filling the keeper better.

The saddle pad appears to fit the shape and size of the saddle nicely, which can be difficult to do with an older saddle like this one.


I assume that this show took place during a cold part of the year based on the pony's long coat. Clipping the coat would really sharpen their turnout while helping to remove the yellow tinge that can be very difficult to remove from long hair (although this rider has done quite a good job of cleaning this long-haired pony up). If this pony has a long coat during the warmer seasons, clipping would be a good idea both to keep her clean and to keep her comfortable.

I recommend shampooing grey manes and tails frequently, even outside of shows, to keep them as white as possible. Once stains have set in they can be very difficult to remove, and frequent shampooing can help to avoid the yellow tinge that we see in this pony's mane, which is practically impossible to get rid of in just one or two pre-show baths.

I am always a fan of braiding the mane, and I think that a row of hunter braids would suit this pony very well, especially since her naturally frizzy mane is difficult to keep neat. I also think that oiled hooves would show off her clean grey coat nicely, as would trimming the long hair on her legs.


While the rider's boots appear to be perfectly clean, they don't shine as though they've been polished. I recommend polishing field boots before every show. Wiping them off with a dry rag will keep them polished while removing any dust that settles on them while you're riding.

I feel like a broken record, having said this in just about every turnout critique so far, but I feel that this rider's jacket is too big and looks a bit messy because of it. The only location on a jacket that really needs to be spacious is the shoulder area because of all of the arm movements associated with riding. The rest of the jacket really doesn't need to be anything but fitted, especially with the stretchy materials that are commonly used today. Some jacket brands offer slim cuts, and some brands simply fit slimmer builds better than others. If all else fails, you could always ask if a tailor could bring the jacket in at the waist. If this particular jacket's buttons have a tendency to pop out, which has happened here, looking down and checking them before heading into the ring might be a good habit to get into.

I like that this rider is wearing clean, dark gloves, and her white show shirt is clean and classic.

While I commend this rider on wearing a hairnet, it's distractingly low. The hairnet should just cover the hair, which means that it shouldn't come any lower than the helmet on the forehead, and shouldn't cover the entire ear if the hair isn't. One more little detail can be fixed with the helmet's chin strap cover, which is sitting off to the side instead of in the middle. In an equitation class, that sort of thing could make her look crooked.

This looks like a rider who puts a lot of effort into her and her pony's turnout, and I think that they will turn heads in the ring if they put just that much more emphasis on the details.

Thank you very much to this week's featured rider for submitting these photos! As always, if you're interested in being featured in a future turnout critique, please send your photos to showringreadyblog@gmail.com


Thursday, July 12, 2012

Hunter Derbies

Hunter derbies have become increasingly popular in recent years. They challenge horses to step outside of the usual hunter box and display more bravery, athleticism and handiness. This allows for some jumpers to participate, too. For the uninitiated, the judging and course plan can be somewhat of a mystery, so today we'll be looking at how these classes are run and judged.



Hunter derbies can vary slightly in format. We're going to focus on how the derbies are done in Canada (specifically for the Canadian Hunter Derby Series), so while things should be similar elsewhere, make sure that you check the class specifications and rules in your area before forming your plan. In the US, hunter derbies may include multiple rounds with different specifications for each.

The hunter derby is usually run in a larger ring than that used for your typical hunter class. Sometimes the class takes place in a jumper ring and sometimes it's put in an enlarged hunter ring. The course will be longer than most hunter courses, more on par with a hunter classic, but with options both in terms of height and in terms of approaches. The jumps should be very natural-looking and usually include things like hay bales, wood piles, coops, walls, natural rails and extra-filled hunter jumps.

Additional tests may be asked for, like walking or trotting a jump, dismounting, opening or closing a gate, etc. Any of these tests will be specified on the course diagram.

I've included two different course plans from this year below so that you can get an idea of what a hunter derby course might look like. You can see that the high-performance options are all labelled as such, but the handiness options are to be identified by the rider alone. If you're worried about keeping track of all the options while you walk the course, you can usually pick up a copy of the course diagram from the show office at some point on the day of the class.



The score for each horse is composed of three parts: the hunter score, the high-performance score, and the handy score. We'll take a look at what each score means and how you might try to increase each one.

Hunter Score

This is what your score would be if the derby were a normal hunter round. The judge is looking for consistency, rhythm, jumping form, way of going, manners, good distances, etc. Horses who show some expression after the jumps aren't usually overly penalized for it in a derby.

Essentially, you want to keep a similar feel as you would have in a regular hunter class while still being able to negotiate the derby course and keep a bit more pace.

The hunter score is usually a score out of 100. A score in the 70's is good with some minor mistakes, while a score in the 80's or higher is very good.

High-Performance Score

The high-performance score is a score out of 10, used to give the horse bonus points for jumping the high-performance options. These options are usually three to six inches higher than the other jumps, or might occasionally be a difficult natural option like a bank. There will likely be five high-performance options, each worth two points.

Each time you successfully navigate a high-performance option, you add two points to your high-performance score. Knocking down one of these options would not result in those points being added, and the judge would lower your hunter score down into the 40's for the knockdown.

Not risking the high-performance options would not lower the hunter score, but would also mean not getting any of those 10 bonus points, so the risk needs to be weighed against the potential benefits.

Handy Score

The handy score is also out of 10, and how these points are assigned is at the discretion of the judge. Many judges seem to designate certain areas of the course for a point each, such that a horse who takes all the handy options will receive a handy score of 10, a horse who takes half will receive a score of 5, and one that takes no handy options will receive a score of 0.

It can be useful to go later in the class in order to get a feel for which approaches seem to be rewarded, and to see certain options being tried that you hadn't thought of.

Handy options can include any of the following, and more:
  • Handy approach to the first jump (doing a rollback turn, cantering straight from the ingate, etc.)
  • Direct routes between jumps
  • Hand galloping long, straight distances
  • Inside turns and rollbacks
  • Taking jumps on an angle
  • Choosing short approaches
  • Handy exit after jumping the last jump (can include landing and turning, cantering straight to the out-gate and walking out - but only if you don't need to stay in for your score, etc.)
Keep in mind that any of these options needs to be done smoothly. Poor execution can affect your hunter score and even mean not getting the handy points for that particular option. Tight turns should be smooth and hunter-like, regardless of the size of the turn.

I've drawn out the path on one of the course diagrams that produced a near-perfect handy score of 9 during that class to show where all the options were that day. I suspect, based on watching other rounds, that the judge was looking for a left rollback off the last oxer for the final handy point:


The top horses will usually return to jog for ribbons under saddle, and will finish with a victory gallop!


Saturday, July 7, 2012

Turnout Critique #4

This week's featured horse and rider are dressed for a casual schooling show. We'll look at how to dress them up for a more formal hunter show while making a few equipment changes to bring them in line with hunter rules.



The first thing that draws my eye in these photos is the rider's bright blue polo shirt. While I'm told that polo shirts were the standard attire at this particular show, I would much rather see a show shirt and jacket to enhance the overall picture and keep the focus on the horse. If polo shirts are to be worn instead at a hunter schooling show, I would prefer to see a more subtle colour like white, black or navy blue be worn. The polo shirt is correctly tucked into the breeches and worn with a belt, as any show shirt should be.

I also notice that this horse appears to be clean and well-taken care of, looking neither too fat nor too thin. Oiling the hooves before entering the ring would add extra polish to their turnout, as would braiding the mane. As it is, the mane is neat and short, but braiding would really make them look like they came to win. The legs look trimmed and tidy.

This horse is wearing bulky saddle pads. The shaped pad is too large for this saddle, with several inches of white showing in certain areas instead of the more subtle and preferred one to two inches. On top of that, there's what looks like a black foam pad on top. Not only does this add extra bulk, but the black colour makes it stand out even more. For the two minutes that it takes to go around the show ring, most horses should be able to go without extra padding. If it's needed, perhaps a saddle fitting or change is in order, or a more advanced shaped pad with inserts or natural sheepskin to protect the back.

The tack looks clean and the excess stirrup leather isn't overly long. I personally prefer the look of a solid stirrup iron in the show ring, but I understand why some riders prefer to use safety stirrups.

Elsewhere on the horse, this rider is using a pelham bit without a snaffle rein. This set-up is not appropriate for the hunter ring; there should be attachments to both the snaffle ring and the curb ring, using either a bit converter or two sets of reins, depending on the rules of the class. Using a pelham in the way that we see here means that only the curb (leverage) action of the bit can be used. Because of this, every touch of the reins is amplified in the mouth, and poll pressure is constantly applied. Using a converter allows some of the pressure to be gained through direct contact, lessening the leverage action, and using two sets of reins allows the rider to determine when to use snaffle vs. curb action. This is especially important with a horse that likes to over-jump like this one, because it's so easy to get left behind and end up pulling back on the mouth.

Returning to the rider, I would like to see her wear gloves in the hunter ring. Her hands are very noticeable against her dark horse's neck while jumping, and wearing gloves would harmonize things. Dark gloves should almost always be a standard part of hunter attire. Her breeches and boots are appropriate, with the boots nicely shined. Her hair is neatly contained in her helmet as far as I can see. 

Overall, this horse/rider combination is almost there! Just a few minor changes would bring them from a casual but workmanlike appearance to a polished, formal hunter turnout.

As always, a big thank you to this week's rider for submitting her photos! If you would like to participate in a future turnout clinic, send your photo(s) to showringreadyblog@gmail.com



Friday, June 29, 2012

Turnout Critique #3


This week we have a neatly dressed horse and rider who are new to showing in the hunters. While they show good turnout for a new pair, their presentation could be improved further by putting even more emphasis on the horse.


One of the first things that jumps out at me is all the HAIR! You can never go wrong braiding a hunter's mane, and this horse would be well suited to neat hunter braids. His mane will need to be pulled/shortened before being braided in order for the braids to be short enough to stay neat all day. At higher levels, braiding the tail would also help to refine the picture. As it stands, the tail is perfect for an everyday class, having been nicely brushed out. His mane doesn't look straight but it's hard to tell whether that's the way it's been trimmed or whether the waviness of the mane is just making it look that way.

The feathers on the legs could also be trimmed to further refine the turnout. This can be done with clippers or scissors (either special curved scissors or regular scissors used at an angle so as not to leave straight lines), and just shortens the feathers to the same length as the rest of the hair on the legs.

His socks are nice and white, and oiling the hooves would help to add some extra polish while bringing the white socks out even more.

The saddle pad was very well-selected to fit this saddle properly, with just the right amount of pad showing evenly all around the saddle. The excess stirrup leather isn't too long and it's neatly contained in its keeper.

It's hard to see clearly from the quality of the photo, but I believe that the noseband and browband have white padding. In the hunter ring, the bridle should be entirely brown or black. Padding like this on the noseband and browband is fine, but it should match the rest of the bridle. The bridle is adjusted properly with the bit and noseband at just the right height.

This rider is neatly and conservatively dressed, as she should be for a hunter class. Her black gloves, white shirt, grey jacket, beige breeches and black field boots are all very appropriate. Her hair appears to be nearly contained in her helmet. The jacket might be a touch large but I could just be seeing wrinkles from the movement in that moment in time. I also wonder whether this rider's field boots might be a bit too large in the leg; the bulge at the back of her leg makes me wonder whether her heel has risen up in them. If so, she could try tightening the laces more if a new pair of boots isn't an option.

Overall, this rider is off to a great start in showing with clean, well-fitted tack and apparel. With a few tweaks and some extra time spent grooming, this pair could easily grab the judge's attention.

Thank you very much to this week's rider for submitting this photo! If you would like to participate in a future turnout critique, send me an e-mail with your photo(s) to showringreadyblog@gmail.com